1. The Nuclear Materials Group
  2. Publications

Publications

Over the years, members of the Queen’s University Nuclear Materials Group have been published in several journals, papers, and articles.

Below is a sampling of some that have been featured.

  • F. Long, S. Goldthorpe, M.R. Daymond, “Effect of metallurgical variables on hydride precipitation behavior in Zr-2.5Nb micro pressure tubes”, J. Nucl. Materials., v571, 153987 (2022)
  • A. Mohammadi, M.R. Daymond, A. Docosolis, “New insights into the structure and chemical reduction of graphene oxide membranes for use in isotopic water separations”, Journal of Membrane Science, v669, 120785 (2022).
  • C. Dai, P. Saidi, B. Langelier, Q. Wang, C.D. Judge, M.R. Daymond, M. Mattucci, “Radiation-induced segregation on dislocation loops in austenitic Fe-Cr-Ni alloys”, Phys. Rev. Materials, v6, 053606 (2022)
  • A. Kamath, A. Tamm, F. Long, M. Griffiths, M.R. Daymond, L.K. Béland, “Characterization of ZrNbFe(Cr) precipitates in Zr-based alloys using density functional theory”, Materials Today Communications, v31, 103381 (2022)
  • M. Topping, F. Long, I.J.S. Cherubin, N.N. Badr, J. Cui, J. S. Park, M.R. Daymond, “Investigating the stability of reoriented hydrides and their reprecipitation using in-situ heating experiments”, J. Nuclear Materials, v564, 153670 (2022)
  • Q. Wang, C.D. Judge, C. Howard, M.A. Mattucci, H. Rajakumar, T. Skippon, M.R. Daymond, G. Bickel, “Characterization of microstructure and microhardness of neutron irradiated Inconel X-750”, J. Nuc. Materials, v563, 153644 (2022)
  • C. Dai, Q. Wang, P. Saidi, B. Langelier, C.D. Judge, M.R. Daymond, M.A. Mattucci, Atomistic structure and thermal stability of dislocation loops, stacking fault tetrahedra and voids in face-centered cubic Fe, J. Nuclear Materials, v563, 15636 (2022)
  • M. Guo, K. Daub, Q. Dong, F. Long, W.J. Binns, M.R. Daymond, D.W. Shoesmith, J.J. Noel, S.Y. Persaud, The Early-Stage Corrosion of Copper Materials in Chloride and Sulfide Solutions: Nanoscale Characterization and The Effect of Microstructure, Journal of Electrochemical Society, v169, 031509 (2022)
  • I.J.S. Cherubin, M. Topping, M.R. Daymond, “Evaluation of irradiation hardening in proton-irradiated δ-zirconium hydride and Zr2.5%Nb”, J. Nuclear Materials, v572, 153600 (2022)
  • S.R. Soria, J. Santisteban, N.L. Buitrago, A. Moya, M. Schulz, M. Grosse, V. Luzin, M. Hache, L. Barrow, M.R. Daymond, “Diffusion of H in Zircaloy-2 and Zr2.5Nb rolled plates between 250°C and 350°C by off-situ neutron imaging experiments”, J. Nuclear Materials, v561, 153547 (2022)
  • I.J.S. Cherubin, F. Long, M.R. Daymond, “High temperature hardness testing of δ-zirconium hydride: yield stress estimation by analytical models”, J. Nuclear Materials, v560, 153424 (2022)
  • P. Saidi, H. Pirgazi, M. Sanjari, S. Tamimi, M. Mohammadi, L.K. Béland, M.R. Daymond, I. Tamblyn, Deep learning and Crystal Plasticity: A preconditioning approach for accurate orientation evolution prediction, Comp. Methods in App. Mech. and Eng., v389, 114392 (2022)
  • F. Long, S. Hanlon, M.R. Daymond, Transformation behavior of hydrides precipitated with or without stress in Zr-2.5Nb. Part I: in-situ S/TEM thermal cycling, J. Nuclear Materials, v559, 153428 (2022)
  • H. Gholamzadeh, M. Topping, K. Daub, S.Y. Persaud, “Characterization of Dealloying and Associated Stress Corrosion Cracking: The Effect of Crystallographic Orientation”, Acta Materialia, Submitted, 2022
  • T. Ghaznavi, S.Y. Persaud, R.C. Newman, “The effect of temperature on dealloying mechanisms in molten salt corrosion”, Journal of the Electrochemical Society, Accepted, 2022
  • H. Gholamzadeh, B. Alsekhan, S. Adil, K. Daub, S.Y. Persaud, “The effect of alloy composition on the dealloying of Ni- and Fe-based engineering alloys in boiling caustic solutions”, Journal of the Electrochemical Society, 169 081508 (2022)
  • T. Ghaznavi, S.Y. Persaud, R.C. Newman, “Electrochemical Corrosion Studies in Molten Chloride Salts”, Journal of the Electrochemical Society, 169 061502 (2022)
  • T. Ghaznavi, M.A. Bryk, S.Y. Persaud, R.C. Newman, “Alloying Effects in High Temperature Molten Salt Corrosion”, Corrosion Science, 197 110003 (2022)

  • Wang, C.D. Judge, C. Howard, M. Mattucci, H. Rajakumar, S. Hoendermis, C. Dixon, M.R. Daymond, G. Bickel, Investigation on the deformation mechanisms and size-dependent hardening effect of He bubbles in 84 dpa neutron irradiated Inconel X-750 micro-tensile specimens, Nuclear Materials and Energy, v28, 101025 (2021)
  • S.M. Hanlon, M. Topping, M.R. Daymond, C. Gillen, P. Frankel, “Fracture Mechanics I-SCC Testing and Review of Out-Reactor PCI Behaviour”, in Progress on Pellet–Cladding Interaction and Stress Corrosion Cracking IAEA-TECDOC-1960, IAEA Vienna, p165-177 (2021)
  • C. Dai, C. Varvenne, P. Saidi, Z. Yao, M.R. Daymond, L.K. Béland, Stability of vacancy and interstitial dislocation loops in α-zirconium: atomistic calculations and continuum modelling, J. Nucl. Materials, v554, 153059 (2021)
  • P.-C.A. Simon, C. Frank, L.-Q. Chen, M.R. Daymond, M.R. Tonks, A.T. Motta, “Quantifying the effect of hydride microstructure on zirconium alloys embrittlement using image analysis”, J. Nuc. Materials, v547, 152817 (2021)
  • M. Mattucci, I. Cherubin, P. Changizian, T. Skippon, M.R. Daymond, “Indentation Size Effect, Geometrically Necessary Dislocations and Pile-Up Effects in Hardness Testing of Irradiated Nickel”, Acta Mater., v207, 116702 (2021)
  • P.F.D. Bennett, M. Topping, P.R. Underhill, J.E. Morelli, M.R. Daymond, and T.W. Krause, “Effects of Heat Treatment on CANDU Pressure Tube Electrical Resistivity”, J. Nuc. Materials, v545, 152597 (2021)
  • P. Changizian, Z. Yao, M.R. Daymond, “Deformation Mechanism Characteristics in a Ni-based Superalloy Inconel X-750: Dislocation/Precipitate interaction”, Materials Characterization, v172, 110891 (2021)
  • F. Long, N.N. Badr, Z. Yao, M.R. Daymond, “Towards resolving a long existing phase stability controversy in the Zr-H, Ti-H system”, J. Nuclear Materials, v543, 152540 (2021)
  • P. Saidi, M. Topping, C. Dai, F. Long, L.K. Béland, M.R. Daymond, “The dependence of damage accumulation on irradiation dose rate in zirconium alloys: rate theory, atomistic simulation and experimental validation”, J. Nuc. Materials, v543, 152478 (2021)

  • P. Saidi, L.K. Béland, M.R. Daymond, “Graphene oxide membranes for water isotope filtration: insight at the nano- and microscale”, J. Physical Chemistry C, v124(49), p26864-26873 (2020)
  • A. Mohammadi, M.R. Daymond, A. Docosolis, “Graphene oxide membranes for isotopic water mixture filtration: preparation, physicochemical characterization, and performance assessment”, ACS Applied Materials & Interfaces, https://dx.doi.org/10.1021/acsami.0c04122 , v12(31), p34736-34745 (2020)
  • D. Kerr, C. Cochrane, M.R. Daymond, “Phase transformation and variant selection in a Zr2.5Nb pressure tube”, Met. Mat. Trans. A, v51(6), p2724-2737 (2020)
  • F. Long, M. Griffiths, Z. Yao, M.R. Daymond, “Characterization of phases in the Zr-Nb-Fe ternary system at the Zr-Nb rich side of the phase diagram”, J. Nuclear Materials, v534, 152142 (2020)
  • Linjiang Chai, Jiahong Dai, Jiying Xia, Korukonda L Murty, Ning Guo, Mark R Daymond, “Influences of -cooling rates on microstructural, textural characteristics and hardness of Ti-6Al-4V sheet”, J. Materials Science, v55, p8346-8362 (2020)
  • P. Saidi, P. Changizian, E. Nicholson, H.K. Zhang, Z. Yao, C.V. Singh, M.R. Daymond, L.K. Beland, “Effect of He on the Order-Disorder Transition in Ni3Al under Irradiation”,
  • Physical Review Letters, v124, 075901 (2020)
  • Z. Wang, Q. Dong, N. Guo, M.R. Daymond, “Crack propagation path selection and plastic deformation at a crack tip in zirconium”, Mat. Sci. Eng. A, v779, 139143 (2020)
  • S. Xu, F. Long, S.Y. Persaud, N. Guo, Z. Yao, M.R. Daymond, G. Wenhau, L. Zhang, Z. Zhou, “Oxidation behavior of 9Cr-4.5Al ODS steel in 600 °C supercritical water and the effect of pre-oxidation”, Corrosion Science, v165, 108380 (2020)
  • J. Hiscocks, M.R. Daymond, B.J. Diak, A.P. Gerlich, “High-resolution residual stress mapping of magnesium AZ80 friction stir welds for three processing conditions”, Met. Mat. Trans. A, v51(3), p1195-1207 (2020)
  • Q. Dong, P. Saidi, L. Béland, Z. Yao, C. Dai, M.R. Daymond, “In situ TEM and multiscale study of dislocation loop formation in the vicinity of a grain boundary”, J. Nuc. Materials, v528, 151872 (2020)
  • H. Qin, Q. Dong, V. Fallah, M.R. Daymond, “Rapid solidification and non-equilibrium phase constitution in Laser Powder Bed Fusion (LPBF) of Al10SiMg alloy: Analysis of nano-precipitates, eutectic lamellae and hardness evolution”, Met. Mat. Trans. A. v51(1), p448-466 (2020)
  • P. Saidi, Z. Wang, Y. Mao, L.K. Béland, Z. Yao, M.R. Daymond, “A method for calculation of bias factors in anisotropic mediums, application to a-zirconium”, J. Nuc. Materials, v528, 151882 (2020)
  • Q. Wang, C. Cochrane, T. Skippon, Z. Wang, H. Abdolvand, M.R. Daymond, “Orientation-dependent irradiation hardening in pure Zr studied by nanoindentation, electron microscopies, and crystal plasticity finite element modeling”, Int. J. Plasticity, v124, p133-154 (2020)

  • F. Long, N.N. Badr, Z. Yao, M.R. Daymond, “Characterizing the crystal structure and formation induced plasticity of y-hydride phase in zirconium”, Materialia, v8, 100454 (2019)
  • C. Dai, P. Saidi, L.K. Béland, Z. Yao, M.R. Daymond, “An atomistic simulation of tension-compression asymmetry response of pyramidal dislocations in deformed hcp zirconium”, Comp. Mat. Sci., v170, 109183 (2019)
  • C. Dai, P. Saidi, M. Topping, L.K. Béland, Z. Yao, M.R. Daymond, “A formation mechanism of c-component vacancy loops in -zirconium”, Scripta Mater., v172, p72-76 (2019)
  • O. Muránsky, L. Balogh, M. Tran, C.J. Hamelin, J.-S. Park, M.R. Daymond, “On the Measurement of Dislocations and Dislocation Structures using EBSD and HRSD Techniques”, Acta Mater., v175, p297-313 (2019)
  • H. Yu, Q. Dong, H.K. Zhang, Z. Yao, M. Kirk, M.R. Daymond, “In-situ study of heavy ion irradiation induced lattice defects and phase instability in β-Zr of a Zr–Nb alloy”, J. Nuc. Materials, v522, p192-199 (2019)
  • C. Dai, F. Long, P. Saidi, L. K. Béland, Z. Yao, M.R. Daymond, “Primary damage production in the presence of extended defects and growth of vacancy-type dislocation loops in α-zirconium”, Physical Review Materials, v3(4), p043602 (2019)
  • C. Cochrane, T. Skippon, M.R. Daymond, “Effect of rate on the deformation properties of metastable β in a high Sn content zirconium alloy”, Int. J. Plasticity, v119, p102-122 (2019)
  • O. Shiman, M.R. Daymond, “Phase transformation and microstructural changes during the hydriding and aging processes in a dual phase Zr alloy”, Material Chemistry and Physics, v231 ,p48-59 (2019)
  • Q.B. Ho, O. Osazuwa, R. Modler, M.R. Daymond, M. Gallerneault, M. Kontopoulou, “Exfoliation of graphite and expanded graphite by melt compounding to prepare reinforced, thermally and electrically conducting polyamide composites”, Comp. Sci. and Tech., v176, p111-120 (2019)
  • T. Skippon, L. Balogh, M.R. Daymond, “Comparison of Electron Backscattering and X-ray Diffraction Techniques for Measuring Dislocation Density in Zircaloy-2”, J. Applied Crystallography, v52, p415-427 (2019)
  • A. Motta, L. Capolungo, L.Q. Chen, M.N. Cinbiz, M.R. Daymond, D. Koss, E. Lacriox, A. Manera, G. Pastore, P.C. Simon, M. Tonks, B. Wirth, M. Zikry, “Hydrogen in Zirconium Alloys: a review”, J. Nuclear Materials, v518, p440-460 (2019)
  • Q. Dong, Z. Yao, H. Qin, M.R. Daymond, “Effect of the addition of Cu on irradiation induced defects and hardening in Zr-Nb alloys”, J. Nuclear Materials, v519, p10-21 (2019)
  • C. Dai, P. Saidi, L.K. Béland, Z. Yao, M.R. Daymond, “Deformation-free nanotwin formation and growth in hcp materials”, in Material Research Letters, v247, p111-114 (2019)
  • Q. Dong, P. Saidi, H. Yu, Z. Yao, M.R. Daymond, “A direct comparison of annealing in TEM thin foils and bulk material: application to Zr-2.5Nb-0.5Cu alloy”, Materials Characterisation, v151, p175-181 (2019)
  • Q. Wang, N. Guo, F. Long, M.R. Daymond, “Effect of heavy ion irradiation on Zr-2.5Nb pressure tube alloy, Part 1: orientation dependent mechanical response”, J. Applied Physics, v125, 085108 (2019)
  • Q. Wang, L. Balogh, Q. Dong, N. Guo, Z. Yao, M.R. Daymond, “Effect of heavy ion irradiation on Zr-2.5Nb pressure tube alloy, Part 2: orientation dependent dislocation loop propagation and elemental redistribution”, J. Applied Physics, v125, 085109 (2019)
  • C. Cochrane, M.R. Daymond, “Effect of temperature and loading sense on transformation-induced plasticity in a high Sn content zirconium alloys”, Mat. Sci. Eng. A, v748(4), p313-326 (2019)
  • Z. Wang, Q. Wang, M.R. Daymond, “Mode I Fracture Testing on Non-Plane Strain Zirconium Foils”, Eng. Fracture Mechanics, v209, p48-60 (2019)
  • S.M. Hanlon, S.Y. Persaud, F. Long, A. Korinek, M.R. Daymond, “A solution to FIB induced artefact hydrides in Zr alloys”, J. Nuclear Materials, v515, p122-134 (2019)
  • P. Changizian, Z. Yao, C. Lu, F. Long, M.R. Daymond, “Radiation Effect on Nano-indentation Properties and Deformation Mechanism of a Ni-based Superalloy X-750”, J. Nuclear Materials, v515, p1-13 (2019)
  • T. Skippon, C. Cochrane, M.R. Daymond, “Crystallographic Orientation Sensitive Measurement of Strain Rate Sensitivity in Zircaloy-2 via Synchrotron X-ray Diffraction”, Int. J. Plasticity, v113, p1-17 (2019)
  • Q. Dong, Z. Yao, H. Qin, M.R. Daymond, “Irradiation damage and hardening in pure Zr and Zr-Nb alloys at 573 K from self-ion irradiation”, Materials and Design, v161, p147-159 (2019)
  • Z. Wang, C. Cochrane, T. Skippon, Q. Dong, M.R. Daymond, “Dislocation evolution at a crack tip in a hexagonal close packed metal under plane-stress conditions”, Acta Mater., v164, p25-38 (2019)
  • S. Xu, Z. Zhou, F. Long, H. Jia, N. Guo, Z. Yao, M.R. Daymond, “Combination of back stress and Orowan strengthening in bimodal structured Fe-9Cr-Al ODS steel with high Al addition”, Materials Science and Engineering A, v739, p45-52 (2019)

  • C. Cochrane, M.R. Daymond, “Phase transformation temperatures and solute redistribution in a quartenary zirconium alloy”, Met. Mat. Trans. A, v49(8), p3468-3485 (2018)
  • F. Long, J. Kacher, Z. Yao, M.R. Daymond “A tomographic TEM study of tension-compression asymmetry response of pyramidal dislocations in a deformed Zr-2.5Nb alloy”, Scripta Mater., v153, p94-98 (2018)
  • S.M. Hanlon, S.Y. Persaud, F. Long, M.R. Daymond, “Advanced Characterization of Hydrides in Zirconium Alloys. In: J. Jackson, D. Paraventi, M. Wright (eds) Proc. of 18th Int. Conf. on Environmental Degradation of Materials in Nuclear Power Systems – Water Reactors. The Minerals, Metals & Materials Series. Springer, vol 2, p577-597 (2018)
  • H.K. Zhang, Z. Yao, Z. Zhou, O. Kaitasov, M.R. Daymond, “In-situ heavy ion irradiation in ferritic/martensitic ODS steels at 500ºC”, Mat. Sci. Tech., v34(1), p42-46 (2018)
  • O.V. Shiman, E. Tulk, M.R. Daymond, “Synchrotron X-ray diffraction study of zirconium hydride distribution in Zr-2.5%Nb and its redistribution during thermal cycling”, Materials Characterisation, v136, p183-195 (2018)
  • N. Guo, Z. Zhang, Q. Dong, H. Yu, B. Song, L. Chai, C. Liu, Z. Yao, M.R. Daymond, “Strengthening and toughening austenitic steel by introducing gradient martensite via cyclic forward/reverse torsion”, Materials & Design, v143, p150-159 (2018)
  • P. Changizian, A. Brooks, Z. Yao, M.R. Daymond, “Nano-scale mechanical properties and microstructure of irradiated X-750 Ni-based superalloy”, Met. Mat. Trans. A, v 49(2), p498-514, selected as Editors Choice Free Access article (2018)
  • N.L. Buitrago, J.R. Santisteban, A. Tartaglione, J. Marín, L. Barrow, M.R. Daymond, M. Schulz, M. Grosse, A. Tremsin, E. Lehmann, A. Kaestner, J. Kelleher, S. Kabra, “Determination of very low concentrations of hydrogen in zirconium alloys by neutron imaging”, J. Nucl. Materials, v503, p98-109 (2018)

  • Yu, H., Dong, Q., Yao, Z., Daymond, M.R., “Stacking faults observed in {10-12} extension twins in a compressed high Sn content Zr alloy”, Scripta Materialia v141, p72-75 (2017)
  • Dai, C., Saidi, P., Yao, Z., Daymond, M.R., “Atomistic simulations of Ni segregation to irradiation induced dislocation loops in Zr-Ni alloys”, Acta Materialia v140, p56-66 (2017)
  • Liang, J., Yu, H., Barry, A., Corcoran, E.C., Daymond, M.R., “Re-investigation of phase transformations in the Zr-Excel alloy”, Journal of Alloys and Compounds v716, p7-12 (2017)
  • Brooks, A.J., Yao, Z. “Spectral and raw quasi in-situ energy dispersive X-ray data captured via a TEM analysis of an ODS austentic stainless stell sample under 1MeV Kr2+ high temperature irradiation”, Data in Brief v14, p707-712 (2017)
  • Yu, H., Yao, Z., Daymond, M.R., “The stability of thermodynamically morphology and applied stress/strain”, Journal of Nuclear Materials v493, p84-95 (2017)
  • Yu, H., Yao, Z., Idrees, Y., Zhang, H.K., Daymond, M.R., “Accumulation of dislocation loops in the α phase of Zr Excel alloy under heavy ion irradiation”, Journal of Nuclear Materials v491, p232-241 (2017)
  • Brooks, A.J., Yao, Z., Daymond, M.R., Yu, H., Zhang, G., “Quasi in-situ energy dispersive X-ray spectroscopy observation of matrix and solute interactions on Y-Ti-O oxide particles in an austenitic stainless steel under 1MeV Kr2+ high temperature irradiation”, Acta Materialia (2017)
  • Ahmmed, K.F., Balogh, L., Idrees, Y., Kerr, D., Daymond, M.R., “Thermal creep behaviour in heat-treated and modified textured Zr-Excel pressure tube material”, Materials Science and Engineering:A v698, p326-340 (2017)
  • Yu, H., Liang, J., Yao, Z., Kirk, M.A., Daymond, M.R., “Effect of heavy ion irradiation on thermodynamically equillibrium Zr-Excel alloy”, Journal of Nuclear Materials v488, p33-45 (2017)

  • Di, S., Yao, Z., Daymond, M.R., Zu, X., Gao, F., “Dislocation-accelerated void formation under irradiation in zirconium”, Acta Materialia v82, p94-99 (2015)
  • Liang, J., Zhang, M., Ouyang, Y., Yuan, G., Daymond, M.D., “Contribution on the phase equilibria in Zr-Nb-Fe system”, Journal of Nuclear Materials v466, p627-633 (2016).
  • Abdolvand, H., Majkut, M., Oddershede, J., Wright, J.P., Daymond, M.D., “Study of 3-D stress development in parent and twin pairs of a hexagonal close-packed polycrystal: Part II-crystal plasticity finite element modeling”, Acta Materialia v93, p235-245 (2015)
  • Abdolvand, H., Majkut, M., Oddershede, J., Schmidt, S., Daymond, M.R., “On the deformation twinning of Mg AZ31B: A three-dimensional synchrotron X-ray diffraction experiment and crystal plasticity finite element model”, International Journal of Plasticity v70, p77-97 (2015)
  • Abdolvand, H., Majkut, M., Oddershede, J., Wright, J.P., Daymond, M.D., “Study of 3-D stress development in parent and twin pairs of a hexagonal close-packed polycrystal: Part I-in-situ three-dimensional synchrotron X-ray diffraction measurement”, Acta Materialia v93, p246-255 (2015)
  • Cai, S., Schaffer, J.E., Ren, Y., Daymond, M.R., “Discovery of a <210> -fiber texture in medical-grade metastable beta titanium wire”, Acta Materialia v87, p390-398 (2015)

  • Zhang, H.K., Yao, Z., Zhou, Z., Wang, M., Daymond, M.R., “Radiation induced microstructures in ODS 316 austenitic steel under dual-beam ions”, Journal of Nuclear Materials v455(1-3), p242-247 (2014)
  • Zhang, H.K., Yao, Z., Morin, G., Griffiths, M., “TEM characterization of in-reactor neutron irradiated CANDU spacer material Inconel X-750”, Journal of Nuclear Materials v451(1-3), p88-96 (2014)
  • Zhang, H.K., Yao, Z., Daymond, M.R., Kirk, M.A., “Elevated temperature irradiation damage in CANDU spacer material Inconel X-750”, Journal of Nuclear Materials v445(1-3), p227-234 (2014)
  • A.Khan, Z. Yao, M.R. Daymond, “Microstructure Evolution during Electron and Ion Irradiation in Commercial Purity Magnesium”, Phil Mag A, v94(17), p190-1923 (2014)
  • M. Sattari, R.A. Holt, M.R. Daymond, ‘Aging Response and characterization of precipitates in Zr alloy Excel pressure tube material”, J. Nuc. Mat., v453(1-3), p265-272 (2014)
  • M. Sattari, R.A. Holt, M.R. Daymond, ‘Variant Selection and Transformation Texture in Zirconium Alloy Excel”, J. Nuc. Mat. v453(1-3), p120-123, (2014)
  • E. Francis, B.M Grant, J. Quinta da Fonseca, P.J. Phillips; M.J. Mills; M.R Daymond; M. Preuss, “High temperature deformation mechanisms in a polycrystalline nickel base superalloy studied by neutron diffraction and electron microscopy”, v74(1), p18-29, Acta Mater. (2014)
  • H.K. Zhang, Z. Yao, M.R. Daymond, M.A. Kirk, “Cavity morphology in a Ni based superalloy under heavy ion irradiation with cold pre-injected helium”, v115, 103508, J. App. Physics (2014)
  • H.K. Zhang, Z. Yao, M. Kirk, M.R. Daymond, “Stability of Ni3(Al, Ti) gamma prime precipitates in a nickel based superalloy Inconel X-750 under heavy ion irradiation”, Met. Mat. Trans. A, v45A, p3422-3428 (2014)

  • Zhang, H.K., Yao, Z., Zhou, Z., Wang, M., Daymond, M.R., “Radiation induced microstructures in ODS 316 austenitic steel under dual-beam ions”, Journal of Nuclear Materials v455(1-3), p242-247 (2014)
  • Zhang, H.K., Yao, Z., Morin, G., Griffiths, M., “TEM characterization of in-reactor neutron irradiated CANDU spacer material Inconel X-750”, Journal of Nuclear Materials v451(1-3), p88-96 (2014)
  • Zhang, H.K., Yao, Z., Daymond, M.R., Kirk, M.A., “Elevated temperature irradiation damage in CANDU spacer material Inconel X-750”, Journal of Nuclear Materials v445(1-3), p227-234 (2014)
  • A.Khan, Z. Yao, M.R. Daymond, “Microstructure Evolution during Electron and Ion Irradiation in Commercial Purity Magnesium”, Phil Mag A, v94(17), p190-1923 (2014)
  • M. Sattari, R.A. Holt, M.R. Daymond, ‘Aging Response and characterization of precipitates in Zr alloy Excel pressure tube material”, J. Nuc. Mat., v453(1-3), p265-272 (2014)
  • M. Sattari, R.A. Holt, M.R. Daymond, ‘Variant Selection and Transformation Texture in Zirconium Alloy Excel”, J. Nuc. Mat. v453(1-3), p120-123, (2014)
  • E. Francis, B.M Grant, J. Quinta da Fonseca, P.J. Phillips; M.J. Mills; M.R Daymond; M. Preuss, “High temperature deformation mechanisms in a polycrystalline nickel base superalloy studied by neutron diffraction and electron microscopy”, v74(1), p18-29, Acta Mater. (2014)
  • H.K. Zhang, Z. Yao, M.R. Daymond, M.A. Kirk, “Cavity morphology in a Ni based superalloy under heavy ion irradiation with cold pre-injected helium”, v115, 103508, J. App. Physics (2014)
  • H.K. Zhang, Z. Yao, M. Kirk, M.R. Daymond, “Stability of Ni3(Al, Ti) gamma prime precipitates in a nickel based superalloy Inconel X-750 under heavy ion irradiation”, Met. Mat. Trans. A, v45A, p3422-3428 (2014)

  • A. Khan, Z. Yao, M.R. Daymond, R.A. Holt, “Irradiation damage in commercial purity magnesium”, Nucl. Inst. Methods B.v 272(1) p231-235 (2012)
  • E. Tulk, M. Kerr, M.R. Daymond, “Material Yield Strength Effect on the Precipitation of Hydride Phases in Zirconium Alloys”, J. Nucl. Materials. v425, p93-104 (2012)
  • H. Abdolvand, M.R. Daymond, “Internal strain and texture development during twinning; comparing neutron diffraction measurements with crystal plasticity finite element approaches”, Acta Mater. v60 p2240-2248 (2012)
  • S. Cai, M.R. Daymond, R.A. Holt, “Deformation of high -phase Zr-Nb alloys at room temperature”, Acta Mater. 2012, v60 p3355–3369 (2012)
  • G.B. Allen, M. Kerr, M.R. Daymond, “Measurement and modelling of strain fields in hydrides precipitated at a stress concentration”, J. Nucl. Mater, v430, p27-36 (2012)
  • A. Khan, Z. Yao, M.R. Daymond, R.A. Holt, “Effect of foil orientation on damage accumulation behaviour in magnesium during irradiation and annealing response of dislocation loops”, J. Nucl. Mater.423, 132–141 (2012)
  • G. Tutuncu , M. Motahari, M.R. Daymond, E.Ustundag, “A modified Rietveld method to model highly anisotropic ceramics”, Acta Mater., (2012) v60, p1494-1502
  • H.M. Reiche, S.C. Vogel, P. Mosbrucker, E.J. Larson, M.R. Daymond, “A furnace with rotating load frame for in situ high temperature deformation and creep experiments in a neutron diffraction beam line“ Rev. Sci. Instrum. (2012) v83, 053901
  • T. Skippon, C. Mareau, M.R. Daymond, “On the determination of single crystal plasticity parameters by diffraction: optimization of a polycrystalline plasticity model using a Genetic Algorithm”, J. Appl. Cryst., v45, p527-643, (2012)
  • L. Balogh, D.W. Brown, P. Mosbrucker, F. Long, M.R. Daymond, “Dislocation structure evolution induced by irradiation and plastic deformation in Zr-2.5Nb nuclear structural material determined by neutron diffraction line profile analysis”, Acta Mater.v60(15), p5567-5577 (2012)
  • B.M.B. Grant, E.M. Knoche, J.Q. da Fonseca, M.R. Daymond, M. Preuss, “Deformation of an advanced nickel based superalloys at room temperature studied by neutron diffraction and electron microscopy”, Acta Mater. v60(19), p6829-6941 (2012)

  • W. Li, R.A. Holt, M.R. Daymond, F. Xu “Modeling creep anisotropy of internally pressurized Zr-2.5Nb tubes”, J. Nuclear Materials, v412(1), p138-144 (2011)
  • R.Y. Zhang, M.R. Daymond, R.A. Holt, “Parametric study of stress state development during twinning using 3D finite element modeling”, Mat. Sci. Eng. A. vA528 (2011) pp 2725-2735.
  • H. Abdolvand, M.R. Daymond, C. Mareau,“Incorporation of twinning into a crystal plasticity finite element model: evolution of lattice strains and texture in Zircaloy-2”, Int. J. Plasticity v27, p1721–1738(2011),
  • Cai, S.,Daymond M.R., Holt R.A., Oliver E.C., “Evolution of internal strains in a two phase zirconium alloy during cyclic loading”, Acta Mater v59(13), p5305-5319(2011)
  • C. Mareau, M.R. Daymond, “Comparison of experimentally determined texture development in Zircaloy-2 with predictions from a rate dependent polycrystalline model”, Mat. Sci. Eng A, v528(29-30), p8676-8686 (2011)
  • Colas, K.B., A.T. Motta, M.R. Daymond, M. Kerr, J.D. Almer “Hydride platelet reorientation in Zircaloy studied with synchrotron radiation diffraction”, J. ASTM Int., v8(1), JAI103033. (2011)
  • Mosbrucker, P., M.R. Daymond, R.A. Holt “In situ studies of variant selection during the  phase transformation of Zr2.5Nb”, J. ASTM Int., v8(1), JAI103066. (2011)
  • Benson, M.L. , P.K. Liaw, H. Choo, D.W. Brown, M.R. Daymond, D.L. Klarstrom, “Strain-induced phase transformation in a cobalt-based superalloy during different loading modes”, Mat. Sci. Eng. A, v528(18), p6051-6058, (2011)
  • B.M.B. Grant, E. Knoche, M. Preuss, J.Q. da Fonseca, M.R. Daymond, “Effect of lattice misfit on deformation mechanisms at high temperature”, Advanced Materials Research, v278, p144-149. (2011)
  • Akhtar, R., Daymond, M.R., Almer, J.D., Mummery, P.M., “Lattice strains and load partitioning in bovine trabecular bone”, ActaBiomaterialia, 7(2), p716-723 (2011)

  • Kerr, M., Daymond, M.R., Holt, R.A., Almer, J.D., Stafford, S., “Observation of growth of a precipitate at a stress concentration”, Scripta Mater., v62(6), p341-344 (2010)
  • Kerr, M., Daymond, M.R., Holt, R.A., Almer, J.D., “Mapping of crack tip strains and twinned zone in an hcp alloy”, Acta Mater. v58(5), p1578-1588 (2010)
  • C. Mareau, M.R. Daymond “Study of internal strain evolution in Zircaloy-2 using polycrystalline models: comparison between a rate-dependent and a rate-independent formulation”, Acta Mater., v58(9); p3313-3325 (2010)
  • M. Preuss, J.Q. da Fonseca, V. Allen, D.G. Leo-Prakash, M.R. Daymond, “Twinning in structural materials with an hcp crystal structure”, J. Strain Analysis, v45; p377-389 (2010)
  • M.R. Daymond, R.A. Holt, S. Cai, P. Mosbrucker, S. Vogel “Texture inheritance and variant selection through an hcp – bcc – hcp phase transformation”, Acta Mater. v58, p4053-4066 (2010)
  • Colas, K.B., A.T. Motta, Y.S. Chu, J.D. Almer, M.R. Daymond, M. Kerr, A.D. Banchik, P. Vizcaino and J.R. Santisteban, “In-situ study of hydride precipitation kinetics and re-orientation in Zircaloy using synchrotron radiation”, Acta Mater., v58(20) p6575-6583 (2010)